ABS on Glass with abs juice - forums.reprap.org
2012年3月31日 · I have tried two different methods of applying the ABS juice. 1) Cold (or coldish) glass. With very thin ABS juice (a lot of acetone little ABS). I use a paper towel to apply, …
ABS on Glass with abs juice - forums.reprap.org
2013年3月6日 · I tried the ABS juice method, but probably still got too much ABS left on the glass. printing the first layers at 120C glass temp and 250C ABS temp, and perfect bottom layer …
ABS juice - forums.reprap.org
2012年12月27日 · I'm trying to make some ABS juice as I'm having trouble getting my prints to stick (ABS on heated glass, 110-115 degrees C). I put 10mm of black ABS in 10ml of acetone …
printing on glass with ABS Juice or sugar coating
2014年1月10日 · I don't know if it's because a chemical reaction between abs juice and the kind of glass that i'm using, but it became a real problem since I had to change the glass support too …
ABS Glue/Juice/Slurry evaporation - forums.reprap.org
2016年11月30日 · My abs mixture is quite thick, really I was looking for a way to silk screen a perfect layer without air bubbles, If the abs glue is smooth as possible you get a clean mirror …
ABS juice spray bottle - forums.reprap.org
2014年9月27日 · I also find that more diluted ABS juice works better. Make up juice so the ABS is saturated in Acetone, pour it off and add same volume again of Acetone i.e. so it ends up 50% …
ABS problems: delamination, cracks, warping [SOLVED]
2015年5月25日 · For ABS i have my cooling fan on slow, start with 255-265C, and bed ~100C. After a layer or too i raise the temp to 285-295, and eventually bed rises to 120C. PVA glue or …
ABS not truly dissolving in acetone, is it ABS?
2014年3月24日 · The juice seems to work though, leaves the haze and makes the prints stick. I am wondering if I have ABS, because I am having printing issues where the second layer does …
Printing ABS without ABS juice - forums.reprap.org
2015年5月22日 · I have an open printer, and i have been trying to print with ABS on a heated build plate, covered with Kapton tape. However, IT WARPS!!! I then tried applying some ABS …
ABS Juice fehlgeschlagen mit Filamentworld ABS?
ich habe probiert, ABS Juice herzustellen. Das Aceton kommt aus dem Baumarkt und das ABS von Filamentworld. Die Resultate (siehe angehängte Bilder) sehen doch recht verschieden …